GMIC, LLC
Instructors and Education Facility
Patrick Gorman                         email: pat.gorman@gmic.us
Founder & CEO
Background: 38 years in the CAD/CAM industry writing Post Processors. 39 years teaching in a technical environment. I have taught at 3 different colleges,
including setting up - writing the manuals - teaching Pro/E classes at Oakland Community College. We are a PTC Education partner assisting them in writing
their manufacturing education manuals since 2008. Certified Instructor to teach in Michigan Public Schools. Outside of work: Hold the grade of Major in the
United States Air Force Auxiliary (Civil Air Patrol), with the position of Internal Aerospace Education Officer for the State of Michigan. I have been awarded the
Lifetime Brewer Memorial Aerospace Award (Great Lakes Region) for supporting and teaching aerospace over 20 years.
Leif Nelson                         email: leif.nelson@gmic.us
Senior Instructor
Background: Currently holds a degree in Applied Science – Major Technological Sciences. Leif has taught at Oakland Community College. With 29 years of
Machine Tool Design & Detail experience for the automotive industry. 22 years of CAD experience designing and detailing Presses, Vacuum Molds, Milling
Machines, Transfer Machines, Thermo Form Injection Manifolds and Isometric Drawings of various machines and their respective components. Leif has been
working with GMIC, since 2009, teaching and co-writing most of the classes offered.
Terry Robbins                                             email:terry.robbins@gmic.us
Director of Education & Virtual Instructor       Phone: 904-414-1429
Background: 30 years in the CAD/CAM Industry with concentration in design and analysis (FEA and CFD).  10 years’ experience designing in the automotive,
aerospace, consumer and defense industries.  20 years teaching and consulting in a technical environment, mainly for PTC Training Partners, but also for Caldwell
Community College in NC and Pellissippi State Technical and Community College in TN.  Education:  Diploma/Apprenticeship in Drafting, Associate Degree in Design
Engineering Technology, Bachelors & Masters in Mechanical Engineering
                                     GMIC, LLC's Education Facility                    
                                     Address and Directions:

Willow Run Airport
801 Willow Run Airport
(801 Kirk Profit Dr.) – Use this street address for GPS directions
Ypsilanti, Michigan 48198-0899


1. There is NOT a sign for GMIC, LLC. Please follow the signs for US Customs
2. The door is in the middle of the building where it is 4/5 stories tall.
3. Directions to the Facility
a. Take Rawsonville Road exit and head NORTH approx. ½ mile to the dead end.
b. Turn left at the end of the road onto the North I-94 Access Road for approx. ½ mile.
c. Turn Right on McGregor and follow to the light at Tyler Rd
d. Turn right on Tyler and follow over the bridge and around the left bent to Kirk Profit (100 yds. +/- after the bridge)
e. Turn right on Kirk Profit
f. You may park anywhere along the side that is not signed or reserved, or in the lot across the street.
g. Entrance is on the right by the USPS Mailbox

4. Classroom is on the 4th floor – Take the elevator at the far end of the entrance hall.
5. Turn left (out of the elevator) and the classroom is just before office suite at end of hall